
Package 1 Standard coverage
4 cameras + 4K NVR
- 4 x 4 MP network cameras
- One 8-channel 4K NVR
- 2.8 mm lens with 137 degree view
- Smart IR night vision to 30 m
- Starlight low-light sensor
- Built-in microphone
- IP67, minus 30 to plus 60 degrees

Commercial & Industrial Installations Across GTA and Muskoka; Same Week Visit
Guelph is manufacturing along Woodlawn and Speedvale, new distribution in the Hanlon Creek Business Park, a lively downtown and a university that shapes half the city. We install security camera systems for the businesses, buildings and homes across Guelph.
A few clips from our projects across Ontario so you can see the kind of work you will get in Guelph.
Videos play from YouTube's privacy-enhanced player only when you press play. See all our videos on YouTube.
Three starting points for small and mid-size Guelph properties. Each includes the cameras, an 8-channel 4K recorder, all cabling, configuration, remote viewing and our 3-year installation warranty. Larger sites are designed from scratch.

4 cameras + 4K NVR

6 cameras + 4K NVR

8 cameras + 4K NVR
Already have an older analog or 1080p system? We replace the cameras and recorder and reuse your existing cables, so you get UltraHD video without opening walls.
Real photos from our jobs across the GTA and Ontario. The same crews and the same standard come to Guelph.
Commercial
Commercial
Industrial
Residential
IndustrialOur CCTV installation service is built around commercial and industrial sites. These are the property types we secure most often in Guelph. Each one has its own page with camera positions, equipment and pricing.
Surveillance camera installation is not one camera repeated twelve times. We match the type to the position: turret at the doors, fisheye over the floor, bullet on the fence, plate camera at the gate. Here is what we install and where it fits.
Long-range cameras for fence lines, laneways, gates and large parking lots. Varifocal lenses let us read a plate or a face from 30 metres and beyond.
Pan, tilt and zoom cameras that follow movement across a warehouse floor or a truck yard. One PTZ with auto-tracking can replace several fixed cameras on a large site.
One ceiling camera that sees a whole open floor with no blind spot. We use them in packing areas, showrooms and restaurants where wall space is scarce.
Two to four lenses in one housing that cover 180 or 270 degrees in full resolution. We installed the first multi-lens Uniview camera in Canada and use them on building corners.
Purpose-built cameras that capture plates at entrances, gates and drive-throughs day and night, with the plate number searchable in the recorder.
Cameras that see heat instead of light for perimeter detection in total darkness, fog or snow, and for early fire detection in recycling and storage yards.
Wi-Fi and point-to-point radio cameras for outbuildings, gates and sites where trenching a cable makes no sense. We size the radio link so the video never stutters.
Cameras that run for months on a charge for temporary needs, remote sheds and spots with no power at all. They record on motion and send alerts to your phone.
We install brands we can support for years, not whatever is cheapest this month. These are the lines we put on Guelph sites and why.
Our most installed camera line. ColorHunter cameras give full colour at night, LightHunter sensors handle mixed lighting, and the NVRs scale from four to hundreds of channels. Our biggest project runs 200 Uniview cameras on a 200 TB recorder.

Cameras, recorder, network and Wi-Fi from one console with no licence fees. A strong fit for offices, clinics and multi-site businesses that want everything in one app.

Premium Swedish cameras for demanding sites: sharp optics, long service life, open platform analytics and excellent cybersecurity practices.
Cloud-managed cameras with built-in storage and simple sharing across many locations. Ideal for organisations that do not want on-site servers.
Cloud-managed Meraki cameras, switches and Wi-Fi run from one dashboard, a fit for organisations already on Meraki networks.

Full-colour and thermal cameras at a sharp price point, a good fit for yards, farms and plazas where the budget matters.
Wireless alarm, motion and video verification that pairs with the cameras for monitored sites and after-hours protection.
Many Guelph businesses already have cameras that no longer show enough to be useful. If the cable is sound we reuse it, swap the cameras and recorder, and the difference looks like this.

Left: the old analog camera, soft and noisy. Right: an UltraHD camera in the same position on the same cable, with faces and plates readable. Drag the handle.
Good security camera installation is mostly planning. These are the three things we work out on every site visit before a single hole is drilled.
The plan shows the eight positions we start from on most commercial sites: a face-height camera at the main door, inward-facing cameras at staff doors, corners that see the whole floor, a high mount in the warehouse, a corner covering the lot and a dedicated plate camera at the gate. We adapt it to your building during the site visit.
The installation of video surveillance goes wrong when steps get skipped. These are the nine we follow on every Guelph job. Keep scrolling and each step comes into focus.
Step 1 of 9
Security planning
We walk the property with you, note every entry, blind corner, cash point and asset, and agree on what each camera must show: a face, a plate, an overview or a process.
We pick cameras for each position rather than one model everywhere: turret at the doors, fisheye over the floor, bullet on the fence, plate camera at the gate, all sized to your network and recorder.
We mark heights, angles and lens choices on a plan so each camera covers its zone without glare, backlight or overlap you pay for twice.
Our own technicians mount the cameras, run and label the cable, seal every exterior penetration and leave the site clean. No subcontractors.
Cameras go on their own VLAN with PoE switches sized for the load, and outbuildings get a wireless bridge that we test for throughput before we leave.
Motion zones, person and vehicle detection, schedules, alerts and user accounts are set for your business, not left on factory defaults.
We calculate retention from camera count, resolution and frame rate, then fit the NVR drives to it, with cloud or off-site copies for the cameras that matter most.
We check every view by day and by night, adjust angles and exposure, and hand you a camera map that shows what each one covers.
Firmware updates, health checks, lens cleaning and fast help when you need to pull footage. Our 3-year warranty covers the installation, and maintenance plans cover the rest.
Honest ranges in Canadian dollars for our security camera installation service in Guelph, installed, for the property types we see most. Camera count, cable distances, mounting heights and how long you keep footage move the number. Our written quote is fixed after the free site visit.
| Property type | Typical installed price |
|---|---|
| Small business, 4 to 8 IP cameras with NVR | $2,000 to $4,500 |
| Retail store or restaurant, 8 to 16 cameras | $4,500 to $9,000 |
| Mid-size warehouse, clinic or office, 16 to 32 cameras | $8,000 to $18,000 |
| Large industrial site, 32 cameras and up | $20,000 and up |
| UltraHD upgrade on existing coax, per camera | $250 to $450 |
Plenty of companies sell cameras. Fewer plan them properly, install them cleanly and answer the phone three years later. This is what you get with us.
The people who quote the job install the job. No subcontracted crews, no surprises on the day.
A three-year warranty on our installation work, longer than most installers in Ontario offer.
Site visits within days, most commercial installs booked within two weeks, and quick turnaround on repairs.
A written quote with each camera, cable run and recorder listed, and no monthly fees unless you choose cloud storage.
We cover every part of Guelph and Wellington County. Among the areas we work in most:
Our crews serve the whole region from our base in King City. Nearby city pages:
All service areas · Starlink installation in Guelph · Access control in Guelph · Wi-Fi access points in Guelph · Network cabling in Guelph · Video doorbells and intercoms in Guelph
Straight answers on cost, timing, legality and equipment. If yours is not here, call us and ask.
Yes. Lobbies, corridors, bike rooms, laundry and entrances, with retention set to cover a full semester of incidents and viewing shared with the property manager.
A 16 to 32 camera system with gate plate capture and 90 days of storage typically costs $9,000 to $20,000 installed.
Cameras themselves do not need a building permit in Ontario. Low-voltage work must follow the Ontario Electrical Safety Code, and if a new 120 V circuit is needed for a recorder or a pole, that part is done by a licensed electrician. Businesses must also follow PIPEDA and post signage where cameras record the public.
Video in public-facing and work areas is allowed with signage and a legitimate purpose. Audio is more restricted, so we normally leave microphones off in staff areas and only enable audio where you have a clear reason and notice is given.
Wired PoE cameras are more reliable and record continuously, so we use them wherever we can run a cable. Wireless bridges and LTE cameras are for outbuildings, gates, construction sites and other places where a cable is impractical.
A small store or office needs four to eight cameras to cover doors, tills and the lot. A plaza, clinic or mid-size warehouse usually needs 16 to 32. We count positions on the site visit and show you the coverage on a plan before you decide.
We size recorders for at least 30 days and usually 60 to 90 days for commercial sites. With smart detection and larger drives, retention of six months or more is practical.
Tell us about the property and we will book a site visit, draw the camera layout and send a fixed written quote.